« SE5 IdO sécurité des objets 2025/2026 b5 » : différence entre les versions
Aller à la navigation
Aller à la recherche
(Page créée avec « == Serveur Virtuel : == Pour créer la VM : xen-create-image --hostname=SE5-crhanim --dhcp --dir=/usr/local/xen --size=20Gb --memory=2048mb --dist=daedalus --bridge=bridgeStudents Configuration réseau de la VM : <syntaxhighlight> # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network inter... ») |
(Aucune différence)
|
Version du 27 septembre 2025 à 13:27
Serveur Virtuel :
Pour créer la VM : xen-create-image --hostname=SE5-crhanim --dhcp --dir=/usr/local/xen --size=20Gb --memory=2048mb --dist=daedalus --bridge=bridgeStudents
Configuration réseau de la VM :
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet dhcp
address 172.26.145.108
netmask 255.255.255.0
gateway 172.26.145.251
dsn-nameservers 172.26.145.251
# post-up ethtool -K eth0 tx off
#
# The commented out line above will disable TCP checksumming which
# might resolve problems for some users. It is disabled by default
#Vérification :
ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=113 time=5.58 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=113 time=5.67 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=113 time=5.55 msAjout de l'interface dans le VLAN 408 :